Hex Winding Bars
Hex winding bars are a simple tool you need when you plan to work on torsion springs. Don’t try to get by without investing in these low-price tools, it pays to use the right tools for the job. These hex winding bars are made from hardened steel and have a shape that adds strength and gives you a firm grip while you wind your springs. The shape prevents it from rolling off your ladder while you work. The hex shape can make the job much less frustrating. The ends are also machined to fit all of the winding cones of different spring sizes. This is THE tool that you need for replacing or repairing your torsion springs, no matter what brand of door you are working on. Plus, like most of our tools here at DIY Garage Door Parts, this hex tool is made in the USA, so you can feel confident about your purchase too!
Step By Step How To Do It Yourself Videos
**Remember that if you are ordering a PAIR of replacement springs to measure BOTH of your existing springs to make sure they are both the same size. It is not uncommon to have a different spring size on the left hand wound and right hand wound springs.
|Dimensions||1 × 18 × 1 in|